Download Smart Phone Upgrade Tool from here, install it in your computer and flash stock or custom ROM firmware easily on your device. If you are newbie to Android development and would like to flash stock firmware on your Qualcomm smartphone or tablet, Smart Phone upgrade tool is the best option for you. How to Manually Upgrade an Android Device Operating System. In this Article: Using Settings Using a Computer Community Q&A This wikiHow teaches you how to install the most recent version of your Android's operating system.

• Technicolor Upgrade Tool For Mac Os
• Itool For Mac
• Android Sdk Tools Mac

• To be able to download Upgrade System To Android P 9.0 (simulator) in your MAC you have to follow the same steps as for PC. You need an Android emulator and currently BlueStacks is the best and most powerful on the market.
• Tenorshare TunesCare is A Free iTunes Repair Tool to Fix iTunes Sync Errors and Get Rid of iTunes Problems. And the tool works for Win and Mac. This site uses cookies.
• Software Update - Software Upgrade Assistant (Samsung) This helps you update the software on your Samsung device using your computer/PC or Mac, in the event an Over-the-Air (OTA) software update fails.This is for devices released after November 2014 only.
• How to Update an Android. In this Article: Article Summary Community Q&A This wikiHow teaches you how to manually update an Android phone or tablet operating system. While your Android will typically update automatically, you can speed up the update process by manually updating as soon as you know an update is available.
• To be able to download Upgrade System To Android P 9.0 (simulator) in your MAC you have to follow the same steps as for PC. You need an Android emulator and currently BlueStacks is the best and most powerful on the market.

ADB and Fastboot will now reside in the C:android-sdkplatform-tools folder if you followed step 2 as outlined. If you chose a different directory, than ADB and Fastboot will reside in the platform-tools folder under whatever location you chose to install the Android SDK Tools to in step 2.

Download and install Minimal ADB and Fastboot

1. Click here to downloadminimal_adb_fastboot_v1.4.2_setup.exe from the XDA forums. Note: the version number could be different if a newer version is released after this post has been published.
2. Launch the minimal_adb_fastboot_v1.4.2_setup.exe file.
3. When asked which directory to install the software to, we recommend that you set it to C:android-sdkplatform-tools, since we will be using that location for the rest of this guide. If you choose a different location, just make sure you remember it.

Downloading the Android Oreo factory system image

Now it’s time to grab the most recent version of the Android Nougat or Android Oreo factory image. Click on the link to download the appropriate file for your device:

• Google’s Android Developer site – Android Oreo updates

Just make sure to select the version that matches your device. This is very important, because you must flash the Pixel image on a Pixel. A Pixel XL image won’t work on a Pixel.

You will notice that each device has a bunch of links under it. Google makes it easy to revert back to an older update if you wish. The most recent update is generally at the bottom of the list. Android Oreo is available for the Pixel, Pixel XL, Pixel C, Nexus Player, Nexus 6P, and Nexus 5X.

Note: Google posts factory images for each and every update. This means that you can follow this guide again and continue to get the latest version of Android Oreo right away without the need to wait until your device receives the OTA update automatically.

Extracting the contents of the system image

The downloaded file should have .tgz as its extension, and you need to extract the contents before going further. The best thing to do is download and install 7 Zip. Once 7 Zip is installed on your machine, follow these steps:

1. Open the 7 Zip File Manager and navigate to the folder that you saved the .tgz file in.
2. Double click on the .tgz file.
3. You will now see a file with a .tar extension.
4. Double click on this file to show the contents (this will take about a minute or more).
5. After it has opened, you should have a folder with the codename of your device as part of the title (ex. marlin for Pixel XL), Double click on it.
6. You should now see a collection of files. Select all of them, and click on Extract to extract all the contents. Type in the destination C:program files (x86)androidandroid-sdkplatform-tools (if you installed the full SDK) or whatever directory ADB and Fastboot are installed in.

Enabling USB debugging and connecting your Nexus or Pixel device via USB to your desktop

Now you need to make sure USB debugging is enabled on your Nexus or Pixel device. Open Settings on your Nexus or Pixel device. If you do not see Developer Options toward the bottom of the Settings screen on your device, follow these steps to activate them.

1. Tap on About Phone and find the Build Number.
2. Tap on the Build Number seven times and the Developer Options will appear on the main page of the Settings.
3. Tap on the Back key to see the Developer Options.
4. Tap on Developer Options.
5. Check to enable USB Debugging.

Before you connect your device to the USB port on your computer, make sure that you have the appropriate drivers installed. You should be all set if you opted to install the Android SDK Tools. If you instead chose to install Minimal ADB and Fastboot, you can grab them here. Since you’re working with a Nexus or Pixel device, you want the Google USB Drivers. The download will be a zip file, so extract the contents where you wish, and remember the location.

Now connect your device via a USB cable, and you are ready to flash the zip file that you extracted earlier. If you’re connecting your Nexus or Pixel device to your computer for the first time, you will get a popup box on your Nexus or Pixel device stating what the computer’s RSA Key is. Just check Always AllowFrom This Computer and tap on OK.

If your Nexus or Pixel device doesn’t show the RSA key popup, then open the notification panel, select USB For Charging Only, and change the mode to Transfer Photos (PTP).

If your Nexus or Pixel device still doesn’t show the RSA key popup, then follow these instructions:

1. On your Windows desktop, go to your Control Panel then Device Manager.
2. You should see your Nexus or Pixel device under Other Devices with a Yellow ! mark on it.
3. Right-click on it and select update driver.
4. Choose Browse my computer for driver software, and choose the directory where the Google USB Drivers are located. If you chose to install the Android SDK tools and followed our instructions, they should be in the C:android-sdkextrasgoogleusb driver folder. If you chose to manually download the Google USB drivers, just navigate to the folder that you archived the contents of the Zip file in.

If your device still doesn’t show the RSA key approval popup, then open the command prompt on your desktop and navigate to the folder where ADB and Fastboot reside. If you followed our instructions from the Installing ADB and Fastboot section, it will be in the C:android-sdkplatform-tools folder. Just type cdandroid-sdkplatform-tools at the command prompt in Windows. If ADB and Fastboot are somewhere else, just navigate to that location instead.

Type “ADB devices” and you should get the following result:

The RSA key approval popup should now be visible on your Pixel device. Just check Always Allow From This Computer and tap OK.

Type “ADB devices” again, and you should get the following result with a different device key:

You are now ready to flash the factory image.

Flashing the Android Oreo factory image

If your device doesn’t have an unlocked bootloader, follow the instructions below.

This process will require a factory reset, so make sure you have your important data backed up.

1. Open the Command Prompt in Windows or Terminal on a Mac and navigate to the folder that ADB and Fastboot are installed in. Again, if you followed our instructions from the Installing ADB and Fastboot section, it will be in the C:android-sdkplatform-tools folder. Just type “cdandroid-sdkplatform-tools”at the prompt in Windows. If ADB and Fastboot are somewhere else, just navigate to that location instead. To make things easier, so you don’t have to type out long directories, you can also paste it by pressing ALT and the spacebar, then choose Edit before selecting Paste.

If you’re using a Mac, you need to add the platform tools directory to your $PATH. In terminal, type “sudo nano/etc/paths”. Now enter your password, go to the bottom of the file, and enter the full path of the “platform tools” directory. Hit control-x to quit and enter Y to save.

The following ADB commands are for Windows machines. If you’re using a Mac, just add “./” before each command, for example: “./adb reboot bootloader”.

2. Assuming you device is already connected to your computer via USB and USB Debugging is enabled, you need to re-start it in fastboot mode. Follow one of the two methods below. Option A may be preferable because it’s another confirmation that your computer recognizes your Nexus or Pixel device.

A) Type “adb reboot bootloader”

B) Turn your device off, then turn it back on while holding down the relevant key combinations for your device. For many devices it’s Volume Up + Volume Down + Power. You can see what your device’s key combinations are here.

3. Type fastboot flashing unlock to unlock you device. As a final warning, this step will erase everything on your device.
4. Type flash-all to install the bootloader, baseband firmware(s), and operating system. If you get a missing system.img error, then scroll down to bottom of this page for further instructions.
5. This process could take several minutes, so it’s important not to power off or disconnect the device. Once it’s finished, your device will reboot and the latest version of Android Oreo will be installed.
6. You can opt to re-lock the bootloader if you wish, but assuming you will do this again with a future update, you might want to leave it unlocked, so you don’t have to perform a factory reset again. If you do want to re-lock, just follow Step 2 above and replace the command in Step 3 with fastboot flashing lock. That’s it.

If your device already has an unlocked bootloader and you don’t want to do a factory reset and lose your data, follow the instructions below.

1. Open the Command Prompt in Windows or Terminal on a Mac and navigate to the folder that ADB and Fastboot are installed in. Again, if you followed our instructions from the Installing ADB and Fastboot section, it will be in the C:android-sdkplatform-tools folder. Just type “cdandroid-sdkplatform-tools”at the prompt in Windows. If ADB and Fastboot are somewhere else, just navigate to that location instead. To make things easier, so you don’t have to type out long directories, you can also paste it by pressing ALT and the spacebar, then choose Edit before selecting Paste.

If you’re using a Mac, you need to add the platform tools directory to your $PATH. In terminal, type “sudo nano/etc/paths”. Now enter your password, go to the bottom of the file, and enter the full path of the “platform tools” directory. Hit control-x to quit and enter Y to save.

The following ADB commands are for Windows machines. If you’re using a Mac, just add “./” before each command, for example: “./adb reboot bootloader”.

2. Assuming you device is already connected to your computer via USB and USB Debugging is enabled, you need to re-start it in fastboot mode. Follow one of the two methods below. Option A may be preferable because it’s another confirmation that your computer recognizes your Nexus or Pixel device.

A) Type “adb reboot bootloader”

B) Turn your device off, then turn it back on while holding down the relevant key combinations for your device. For many devices it’s Volume Up + Volume Down + Power. You can see what your device’s key combinations are here.

3. You will need to edit the flash-all.bat file that you extracted from the factory image, which should be in the same directory as ADB and Fastboot. Just open it with any simple text editor such as WordPad. You will see a line that starts with “fastboot -w update……..” Just remove the -w from this line. The -w flag wipes your data, so removing it will obviously stop that from happening.
4. Type flash-all to install the bootloader, baseband firmware(s), and operating system. If you get a missing system.img error, then scroll down to bottom of this page for further instructions.
5. This process could take several minutes, so it’s important not to power off or disconnect the device. Once it’s finished, your device will reboot and the latest version of Android Oreo will be installed.

If you get a missing system.img error in Step 4 of either method, then follow these instructions

Extract all the files from the .zip file, which happens to be one of the files extracted from the original .tgz you downloaded from Google. The Zip file name probably begins with “image.” There should be various .img files within this Zip file. On top of this, you already have bootloader and radio .img files in the same directory. Just make sure all the .img files (from Zip file) and the ones that were already extracted are in the same directory as ADB and fastboot. Now you are going to flash each .img file separately.

If you don’t have either one of the bootloader or radio .img files, don’t worry, not all devices need them. It’s also important to follow this exact order. At the CMD prompt and in the C:program files (x86)androidandroid-sdkplatform-tools directory (if you installed the full SDK) or wherever ADB and fastboot reside. Remember, add ./ before each command if you’re using a Mac.

1. type fastboot flash bootloader [name of your file].img
2. type fastboot flash radio [name of your file].img
3. type fastboot reboot-bootloader
4. type fastboot flash recovery recovery.img
5. type fastboot flash boot boot.img
6. type fastboot flash system system.img

Lastly, if you want, you can wipe the cache with this command – fastboot flash cache cache.img

Now it’s time to enjoy your Android Oreo update. Remember, you can follow this guide again when Google issues its next Android update, so be sure to bookmark this page for later reference. If we missed anything, or if you have any other tips, please don’t hesitate to let us know in the comments.

Update: Revised for the the release of Android Oreo.

Editors' Recommendations

Apple now supports Windows 10 in Boot Camp. If you have Windows 7 or 8.1 installed on a Mac, you can take advantage of the free upgrade offer and get Windows 10. Just ensure you’ve updated your Apple software first.

Technicolor Upgrade Tool For Mac Os

If you’d like to perform a clean install of Windows 10, you can do that in the future after taking advantage of the free upgrade once. You’ll be able to install Windows 10 on that same Mac in the future. Or, you can install it with a new Windows 10 product key.

What You’ll Need

Before you get started, here’s what you’ll need:

• A supported Mac: In general, you’ll need a Mac made in mid 2012 or later to run Windows 10 Apple provides a list of officially supported Mac.
• Windows 7 Service Pack 1 or Windows 8.1, if you’re upgrading: If you have the original version of Windows 7 or Windows 8 installed, you can upgrade to Windows 7 Service Pack 1 or Windows 8.1 for free from within Windows. You’ll then be eligible for the free upgrade.
• A 64-bit edition of Windows: Boot Camp only supports 64-bit versions of Windows 10. If you’re installing Windows 10 from scratch, you’ll need the 64-bit edition of Windows 10. If you’re upgrading an existing Windows system, you’ll have to upgrade from the 64-bit edition of Windows 7 or 8.1. If you have a 32-bit version of Windows 7 or 8.1 installed, you’ll need to install the 32-bit version first to take advantage of the free upgrade.
• An authorized Mac or Windows 10 product key, if you’re clean-installing: If you’re installing Windows 10 for the first time, you’ll need a Windows 10 product key. if you’re installing Windows 10 on a Mac that’s already taken advantage of the Windows 10 upgrade offer, you can just install Windows 10 fresh and it will activate with Microsoft.

Prepare Your Mac’s Software

Apple recommends you have the latest software updates before doing this. To do this, boot your Mac into the OS X system, log in, and open the App Store app. Select the Updates tab and ensure you have the latest version of Mac OS X and your Mac’s firmware. Install any available updates.

Next, boot into Windows and launch the Apple Software Update application. Install any available updates from here, too.

Upgrade to Windows 10 in Boot Camp

RELATED:How to Upgrade from Windows 7 or 8 to Windows 10 (Right Now)

Download the Windows 10 media creation tool from Microsoft and launch it. Select “Upgrade this PC” to upgrade your current Windows installation to Windows 10. Go through the process normally, as if you were upgrading to Windows 10 on a typical PC.

The upgrade process registers your Mac’s hardware with Microsoft. Microsoft will register your Mac’s hardware and grant it a free license. You’ll be able to clean-install Windows 10 on that specific Mac in the future. You must perform an upgrade install to gain your free Windows 10 license before you can perform a clean install.

If your Mac reboots to Mac OS X, restart it, hold the Option key while it boots to launch the Startup Manager, and select the Windows option.

After upgrading to Windows 10, open the Apple Software Update application again and install any other available updates. Everything should work normally.

Install Windows 10 in Boot Camp

If you’ve previously upgraded to Windows 10 once, your Mac’s hardware has been registered with Microsoft and you can perform a clean-install of Windows 10 on that specific hardware. You won’t have a product key, but it will automatically activate itself. Just go through the Windows 10 installation process normally and skip entering a product key. After it’s completely installed, Windows 10 will activate itself online with Microsoft.

If you just have a Windows 7, 8, or 8.1 license and you haven’t performed a Windows 10 upgrade on that particular Mac yet, you’ll need to install Windows 7, 8, or 8.1 and upgrade to Windows 10 from there. In the future, you’ll be allowed to clean-install Windows 10 on that Mac.

If you’ve purchased a new copy of Windows 10 for use on your Mac, you’ll have a product key you can enter while installing Windows 10.

Installing Windows 10 in this way is the same as installing any other version of Windows on a Mac. Use the Boot Camp wizard to create Windows 10 installation media, partition your hard drive, and start installing Windows.

You can download a Windows 10 ISO file directly from Microsoft for the Boot Camp wizard. You’ll need a legitimate Windows 10 product key or a Mac that you’ve previously upgraded to Windows 10 by taking advantage of the free upgrade offer to do this.

You could also install Windows 10 in a virtual machine program like Parallels Desktop, VMware Fusion, or VirtualBox. If you already have a legitimate copy of Windows 7 or 8.1 running in a virtual machine, download the media creation tool inside the virtual machine to upgrade to Windows 10 for free. If you have a new Windows 10 license, you can install Windows 10 like you would any other edition of Windows in the virtual machine.

Itool For Mac

Image Credit: DobaKung on Flickr

Android Sdk Tools Mac

• › What Can I Do with My Old iPhone?
• › How to Stream UFC 242 Khabib vs. Poirier Live Online
• › Free Download: Microsoft’s PowerToys for Windows 10
• › How to Overclock Your Computer’s RAM
• › What’s New in Chrome 77, Arriving September 10